Dd-wrt Wi-fi Router Bridge Linksys 160n And Wrt54gs

On this the way to guide I will probably be showing you how create a wi-fi bridge between a Linksys 160n wi-fi router and a Linksys WRT54GS wireless router that has been modded with the DD-WRT firmware. You would possibly ask yourself what's a wi-fi bridge.You also could ask your self why you'd need to create a wi-fi bridge in the first place. Properly a wi-fi bridge is once you connect one router to a different router without using any exhausting wired cables. It's possible you'll want to create a wi-fi bridge for some of the following reasons.

Laptop are located at different ends of your own home and you can not run a ethernet cable between the 2 router. You wish to hyperlink to you neighbors network so you can share web service, recordsdata, and media reminiscent of music and movies. The probabilities are endless on the subject of networking routers together using wireless.

For the wi-fi bridge setup I shall be utilizing the next ip deal with and subnet setup:

* Wireless Router 1 = Linksys WRT160n 192.168.1.0/24
* Wi-fi Router 2 = Linksys WRT54GS-WRT mod 10.0.1.0/24

The Linksys WRT 160n wireless router will probably be immediately linked to the Web service, and the Linksys WRT54GS DD-WRT modded router will create the wi-fi hyperlink between the two routers. One of the best ways to setup your wireless bridge is to have a computer that has each a wifi connection and a ethernet connection. To start the set up, use your wi-fi connection to hook up with router 1, which is the Linksys WRT160N. After you've gotten connected the router, open your web browser and kind in the default gateway which ought to be 192.168.1.1. Click on on the Status Tab and ensure that router 1 has a internet connection.

After you recognize that the first router has a web connection, go to the Wireless Security Tab and setup the encryption type and paraphrase key. Just be sure you are using appropriate encryption between both of the routers.linksys-wrt160n-wpa-wi-fi-security

After you've set the encryption type and key on the first router, disconnect from this router. Now hook up with the WRT54GS DD-WRT modded router, then go to the setup tab and alter the native network to 10.0.1.0 or no matter network vary you prefer.

* Local Ip Address: 10.0.1.1
* Subnet Mask: 255.255.255.0
* Gateway: 10.0.1.1
* Local Dns: 10.0.1.1

After you will have changed the community setup in your modded DD-WRT router, disconnect from the router then reconnect to so that you simply obtain your new ip address. Your new ip handle must be somewhere inside the 10.0.1.zero network. Now open a web browser at point it in direction of 10.0.1.1, which is now the default gateway on your WRT54GS DD-WRT modded router.

Now go to the standing tab and click on on the wi-fi tab. Within the wireless tab you need to see a button that claims web site survey. The positioning survey button is located in the direction of the underside of the page. All it's a must to do now is choose router 1 from the list, which ought to be the Linksys WRT160N.

After you will have selected router 1 from the list, go to the wireless tab and click on on the wi-fi security tab. All you need to do now is enter the very same encryption sort and key that you simply setup for router 1. After you have set the encryption kind and key into ybur modded DD-WRT router, all it's a must to do is apply the settings. You need to now have a wi-fi hyperlink between the Linksys WRT160N and the Linksys WRT54GS. Now join utilizing a wi-fi connection to the DD-WRT modded router, and make sure your web connection work.

By: dougiqk9ba

Article Directory: http://www.articledashboard.com

DD-WRT Wireless Router Bridge