Dirt Bike Track - Constructing Your Own In 6 Painless Steps

More people than you know construct dirt bike tracks on their property. It allows them an opportunity to hone and perfect their riding and jumping skills without being in the spotlight at busier communal tracks. The simplest and most typical sort of track to create is a Motocross course. It's merely a matter of observing the terrain, noticing where the small hills and elevations are, and incorporating the natural contours of the property into the design of the track. Of course, the more elevation changes, slopes, and small hills you have got on the property the better your dirt bike track will be.

Based on the total amount of property you have access to, you may only be able to create a few jumps plus a berm or two. However, it is not essential to own acres and acres of land; you still have an opportunity to build a small training course with a half acre plot or less. Without having access to additional property you will be restricted to making a circular or horseshoe-shaped course, but it can still be exciting and educational. Five acres of land is good and will allow you to design it almost any manner that you can imagine.

Step 1 - Incorporate the natural contours of the land into your blueprint

The 1st thing you should do is to ride your dirt bike around the property. This will let you know where the natural flow of the course takes you. Let the land be your guide as to how the course should be laid out. Make use of some existing hills as jumps and the base of others as berms. Notice where the elevation changes are and how they can be employed to your advantage.

Step 2 - Advanced planning is a must

Your goal should be to include the natural landscape into the design of the course. Keep this at heart as you're riding around the property. Also, you will want to consider a few other essential items. Water drainage is one of the most important issues. Low lying areas can become small lakes or swamps during wet weather. It's best if you can steer clear of these impending mud holes while planning your dirt bike course since it will allow you to be able to ride more often and require less course repair. Plus, all riding paths should be at a slight angle, just enough to permit the water to drain off quickly, which will keep your course drier.

Step 3 - Obtain approval and necessary permits

Before starting to construct the course there are a few other things that should be considered and getting an Okay from the neighbors should be first on the list. Without having their approval there is really no use in going any further. Some neighbors may not be quite as agreeable as others and you do not want to spend your energy and money for a project which will later be shut down by the local powers that be. Once you get their consent you'll want to get any permits that may be needed and making certain you will not be breaking any local laws and regulations.

Step 4 - How much is your dirt bike track going to cost you?

One more factor will be the expense. If you have got many acres of land it could cost a few thousand dollars to lease the Bobcat and purchase gasoline and other equipment. Work out the total price before spending one dollar and make certain it is affordable to you. After you have got the necessary authorization, permits, and money it's time to lease the equipment and start creating the course.

Step 5 - Safety must always be a consideration when planning a course

One of the most important issues needs to be rider safety. Riding dirt bike motorcycles is not the safest activity on the planet, so situate your jumps in open locations and not around massive rocks or trees. However, any rocks or trees that may possibly come into play should have old rubber tires, mattresses, or bales of hay as barriers. These cushions can prevent injury. It is also a sensible plan to use these protecting barriers around soft berms in view of the fact that these can be places where losing control is possible.

Step 6 - Build the course and start having fun

The actual track construction process can take from a day or two up to a week or more depending on the dimensions of the acreage. Utilize the Bobcat to first layout the general route of the whole course, remembering to create slight slants in the trails for drainage. Once the whole track has been graded properly it's time to begin creating specific jumps and berms. Use the Bobcat to grade hills to your skill level and don't make jumps beyond what you feel comfortable with. Within a few days you will be having fun using your track while improving your riding proficiency at the same time.

By: Joshua A Harding

Article Directory: http://www.articledashboard.com

Locate additional information concerning dirt bike motorcycles as well as other interesting information concerning KTM dirt bikes along with lots more.