Driving A Car Or Power Boating Just The Same As Driving A Car
They may both have a steering wheel, but there is more to the power boating experience, which is really a whole new ball game unrestricted by roads.
To begin with, one does not have the facility of brakes in power boating, as is found in the case with driving a car. No brakes is overcome, in order to slow the boat down, usually by firstly throttling down then put the engine into idle mode before then shifting into reverse where the reverse thrust will bring the boat to a stop.
An imporant point and one not to be overlooked, not bringing the engine to idle before reversing it will surely damage the gear box. Due to this proceedure which makes slowing down a power boat much slower, when it comes to jetty's or docks, one should approach them as well as other objects carefully and importantly slowly.
Essential Differences in Turning
There should be enough room for the stern to swing before attempting a power boating turn. That is not all there is to how power boating differs from steering a car.
Turning is also different, and power boating requires getting the rear end to turn first and then the front end follows. This is due to the power is applied from the rear of the power boat and pushes the rear end around which is the complete opposite of how a car turns. Turning the wheel slowly on the power boat causes the stern to swing in a great curve, and the boat will change direction.
Another difference between the two that may not at first seem obvious, and that is what will happen when one stops. When a car stops and the brakes are applied, it will stay stationary, but when the boat stops without the luxury of brakes there may be other boats passing or changes in the water currents that will cause it to keep moving.
These result in having to carefully maneuver the boat towards the dock. As with any new experience practise will help greatly and once one understands how power boats work, it should be easy to enjoy the power boating experience.
Power boating is also referred to as Stink Boating by sailors. The first one was Robert Fulton’s invention named Clermont, which was the first commercial steamboat in the world.
At present, those simple steamboats have been replaced by millions of power boats that are traversing the waters with abandon. There are now many different types of power boats that each have different defining characteristics.
Every boat has its own characteristics, though they all work on the same principles. Knowing why the boat floats, why does it heel, and how will it respond in the water are important considerations that need to be dealt with to get better power boating results.
After a short period of time while power boating the actual driving or the boat will become second nature allowing your attention to focus on safety and enjoyment of your power boating experience.
Getting the best out of your power boating experience requires that you choose the right power boat. You will certainly need to consider how big is it, how much speed it has, as well as what the cost is.
In addition, you would also need to investigate the hull design, engine as well as drive system to get the best from your power boating. Also, you would need to understand how the boats respond to one’s touch.
Leonie Brogan is an accomplished Author of several Romantic Novels and prize winner of Mills and Boon short stories competition 1993. Her love lies with living life to the best she can and helping others.
Find more of her work here at relationships-boats-boating In French
copyright 2007 A.R.R.
Click the XML Icon Above to Receive Boating Articles Via RSS!
