Folk Art: Paper-cutting Steps In Making - Bamboo Kitchenware Manufacturer - Lighted Bath Mirrors

For people who are beginners to learn about the production of paper cutting is a very useful step.
   1, for drafting:
 
   Idea is confirmed, drafting layout of the screen for specific description, draw black and white. Modify the part of the available heroin. For beginners, the more detailed manuscript, carved up more save trouble. If the symmetry of the manuscript carved, painted half of the can.
   2, cut, engraved:
 
   Such as carved with a knife. Shall screen and paper staple good, would be the four corners fixed to the wax plate, in order to ensure the accuracy of the image, the characters carved features the first part of the first birds and flowers carved detail or critical office, and then slowly to the surrounding carved from the center, knife-order like writing the same from top to bottom, from left to right, from small to big, from fine to coarse, from local to general. Avoid duplication of knives, not to break the site must be engraved, not to tear by hand, otherwise, paper-cutting will affect the appearance with a flash.
   3 Jie from:
  
   After cutting carved a picture of the need to open a paper cutting, electro-optical paper, textured paper, because paper is smooth, easily opened, with one rice paper and flour paper, because paper thin, but also by the stuffy tide and color, adhesion to each other, more difficult to reveal, so off before exposing, must first carving board gently Roudong, the paper away from each other, and then gently lift first angle of the first sheet of paper, while through your mouth while exposing blowing, to help kick.
   4, paste:
 
   After the mortgage from the finished product need to paste up, easy to save. There are two ways, first is to trust a piece of paper flat on the paper-cut, thin strips of wood with a brush or dip a little bit of glue stick from the inside out, this method can not make all the sticky paper cutting level, the speed is relatively slow, Comparative advantage is simple; the second is to turn paper-cut flat on the paper, then brush dipped in dilute the paste, gently brush horizon in the care of the paper to be careful not to crease the paper, brush, brush The paste must be less, and then soon put a good paste brush this side of fastening the back of the paper-cut, gently flatten it to make paper-cut all the flat stick to shore up the paper. Gently lift the folder level kept dry. In addition to viscosity paste, the white latex can.
   5, product modifications:
   Moment when the cutting knives, scissors and sometimes go bad, especially the engraved paper. If it is a large area of a bad moment, not easily repaired, such as small area carved bad, can go to the local moment, added something to re-carved blocks. Paper-cut dyed the wrong color can not be covered, so it had to be dyed to the bad parts of carved, stained and then re-added something blocks. Modifications must be aware of before the knife.
   6, copy?? Smoked like?? Sun-like
   There are two ways to copy, one would like placed on white paper-cut, with the flat on the water, when water soaked paper, and free of drops, it will be carved out of the water while paper and white paper, posted on board, then the paper down on the oil lamp on the steam, but not too close from the burner to avoid burning. If you need many production, drying can take a blueprint approach: the original dry, and brush a good layer of liquid (hexacyanoferrate, and water solution) of the white paper, glued together, with two glass clamp, in the sun Under the sun 3 to 4 hours, to be washed with water after developing liquid paper, you can copy.

By: imagesetpixel

Article Directory: http://www.articledashboard.com

We are high quality suppliers, our products such as Bamboo Kitchenware Manufacturer , lighted bath mirrors Manufacturer for oversee buyer. To know more, please visits led lighted makeup mirror.