Custom Search
|
|
Help On Changing Your Guitar Strings
When replacing strings leave enough slack to ensure that there is going to be 3 – 5 turns of string around the tuning head. Do not use several turns or wraps as this leads to wavering and constant string stretching. Make sure you gently but firmly stretch the strings when they are new. While linked to your tuner keep pulling and stretching the string and re-tune as necessary. Remember that nylon strings will always take a great deal of stretching to remain in tune. There are many interesting products which can assist in tuning stability and make changing strings easy. Two good ones are the Spertzel or Grover locking machine heads. They require no turns or wraps at all as they lock the string into the machine head. A good idea on electric guitars with tremelo bridges such Floyd Rose types and also on Gibson style ‘tune o matic’ bridges is to change the strings one at a time. This stops the tremolo going completely out of adjustment and, in the case of the tune o matic, from falling off the guitar and losing the whole set up. Always keep your new strings as new as possible by wiping them down after each playing and using string life products such as Fast Fret or Finger Ease before and after each jamming session. It makes a great effect on the stings and length of a good string tone. You can greatly extend string life by also using strings brands such as Elixir strings, which add about 8 times to the life of strings. However, these strings are about 3 times more expensive than regular strings. A essential tool to have is an all in one string crank/winder/ string cutter and bridge pin remover such as those made by Planet Waves or similar. Article Directory: http://www.articledashboard.com Axebay s is a guitar lover and has been jamming on the guitar for years. Visit Axebay to find about more about guitars, meet other guitarists at our guitar forum, find articles on guitars, and get more information on guitar strings. |
|
© 2005-2011 Article Dashboard