Outdoor Storage Shed Plans – Learn How To Construct An Outdoor Shed

If you are one who dabbles in gardening or DIY projects, then you must have a collection of tools and they need storage space. The ideal place for them is a shed where you can store them neatly and always know where a tool is when you need it.

Constructing an outdoor shed may seem difficult but it is not. Here are a few simple steps.

• Step 1 is having one of the best storage shed plans. These are widely available online. Look at the various plans and choose one that has the look you want and that is in scale to the size of your house so that it is not a domineering structure or a diminutive one in relation to the house. You also want to ensure that you are in compliance with regional construction laws and this will most likely be municipal by-laws. In most areas, a structure less than 100 square feet does not require a building permit but do get in touch with the local building authority to be on the safe side.

• After choosing a plan, you need to have a layout for the shed. Mark the perimeter as you need to be very precise right from the foundation stage. Use tracing triangles or right angles to mark out stakes and then attach strings to line out the perimeter. Make sure the perimeter is a perfect square or rectangle by measuring the lines before starting to work on the foundation.

• The next step is to create a foundation and this can be made with concrete piers or concrete slabs but concrete block foundation. However, it will depend on the budget, the ground that is being built on and how each type of foundation will be.

• The floor system is next. This is done by setting floor joists in such a way that the dimensions on the outside are in line with those of the shed. Use pencil marks about every 12 inches on two parallel joists and draw right triangles using the triangle method. After this, the brackets need to be nailed down and they should be centered also every 12 inches and begin to slide in stringers and then nail then down as well. The last step to complete the floor is to nail plywood over the entire surface. Tighten up by placing plywood perpendicular to the joists or applying strong adhesive.

• The next step is the wall. Lay down precut rows of timber all round on plywood laying one next to the other and nailing them down fast. Do this for the four walls and then get help raising them up. Lay down temporary bracing to hold the walls before you nail them down to each other. Finish with a plank of wood all around on top of the walls. You should now have a shed with four walls, a floor and no roof which is the last step.

To finish the roof, lay down four wooden beams perpendicular to the roof to form a triangle at the center of the shed. Then, nail down wooden planks one by one to complete the roof, nailing them down as well. The second last step is to get the door attached using hinges and lastly the window. You can choose to use shutters instead of windows with glass panes.

Finish with a lick of paint of you wish or leave the shed natural.

By: waylonbesley

Article Directory: http://www.articledashboard.com

www.shedplansadvisor.com tells you how wood storage shed plans can make it extremely simple to build a shed. Check it out to learn everything about how to complete woodworking projects with ease.