Custom Search
|
|
Setting The Record Straight For Cold Air Intakes Vs. Short Air Intakes
Let’s look at Cold Air Intakes. The Cold Air System replaces your stock air cleaner box and its plumbing with a simple tube that relocates the air intake to a position where it is picking up cold air from outside the engine compartment. This system consists of a large tube that allows greater airflow capability than the stock filter system. I’ve noticed that people have expressed concerns about water penetrating their engines with this system. First, it is HIGHLY unlikely that this will ever be a problem. Rain and water droplets are no problem. The only case that could be a potential threat is if you drove into an extremely deep puddle, submerging the intake head. The car would have to be in the water so that the intake was submerged, and then it would start sucking up water, making your engine hydro-lock. In both cases the intake is collecting air from outside your engine compartment. The purpose of the intake is to collect a colder air charge than inside the engine compartment, allowing the fuel management system to give the engine a denser air/fuel charge into the combustion chamber. To clarify: Cold Air = More Horsepower. The warm air from your engine compartment is good for fuel economy, but because is has less oxygen molecules than a cold air charge, the fuel will be leaned out. This increases your fuel efficiency, but decreases your horsepower. To conclude, you should look at your car and figure out what system will work with your car’s ground clearance and hood type. Article Directory: http://www.articledashboard.com Now that you are an educated shopper, you can look through all the cool colors and designs to pick out your intake. Injen intakes are very popular, but I’m currently using an AFE intake. Can you hear that? Sounds like the record has been set straight. - Tim Saunier |
|
© 2005-2011 Article Dashboard