Stop The Frustration & Fix Xbox 360 Red Ring Of Death Easily - Just Follow These 10 Simple Steps

Are you one of so many frustrated Xbox 360 red ring of death victims? Finding ways to fix Xbox 360 red ring is a somewhat confusing and technical situation to most of us. You need to be technically savvy in order to even begin fixing the 1, 2 or 3 red lights on your console. If you want to successfully fix red ring Xbox without damaging it completely, then I would strongly suggest you never try and wrap your Xbox in a towel. This trick only works short term and will increase your risk of completely wiping out your console for good.

You see the thing is that these consoles are so much fun, that people play on them for hours and days on end, which is fine. But there is simply a design flaw within the Xbox 360 that helps to cause over-heating if not taken care of properly and regularly. Today you are hopefully going to find these top tips useful and at the end, you should be able to fix red ring of death whilst being in the comfort of your own home.

We both now have the understanding of what can harm your console, lets look at what you can do in order to fix Xbox 360 red ring of death for good, without causing any further harm to your gamer.

1. You should first open your console using a poker to remove the outer shell.

2. Dis-connect all wires (make-sure power is switched off) and remove your DVD drive.

3. Next to be removed is the motherboard inside along with the fan.

4. All you need to for this next step is to simply turn the motherboard over onto its back.

5. Now this is where you need to find and locate where the GPU & CPU are. Simply find the heat-sink and gently loosen it and you should then see both of the above mentioned.

6. Both the GPU & CPU are required to be cleaned well enough to be called brand new again.

7. Have you ever heard of a substance called arctic silver compound? Do not worry, you can find this stuff in almost every computer repair shop. It is around the same price as a candy bar and all you do once you have it is to apply onto the GPU itself. (always do extremely carefully)

8. Go and have a cup of coffee, because you need to wait for the compound to set. This takes around fifteen minutes, once done you need to put the nylon washers x2 back onto each heat sink screws, proceed by putting the screws back onto your motherboard. Remember to add more washers on top of those screws again.

9. A delicate job of placing the heat-sink back on top the screws is required, once done fasten back down.

10. You are nearly done. Put everything back in its place by reversing what you have done and enjoy playing your Xbox 360 once again.

By: Gavin M B

Article Directory: http://www.articledashboard.com

Now if you dont really fancy doing all this without real guidence then there are 2 more options for you. You could pay Microsoft $140 to have your Xbox 360 3 red lights fixed and then wait 6-8 weeks before you will even see it again. Or just Fix Xbox 360 Red Ring of death yourself in 1-2 hours and do it in a much cheaper way (AT HOME) by Clicking Here.