Ten Practice Questions For Ccna Exam - Exam Practice For Ccna 640-802

Practice is the mother of learning. After studying your textbooks and learn the theory for the CCNA syllabus, the best approach to assimilate and strengthen your knowledge is to solve many practice questions and study test exams. This article provides ten practice questions which focus on a wide range of topics that you need to learn for passing your CCNA exam.

QUESTION 1: Which of the following CLI prompts indicates that you are working in privileged EXEC mode?

A. Hostname>
B. Hostname#
C. Hostname-config
D. Hostname-exec>

ANSWER: B

QUESTION 2: What command do you type to save the configuration stored in RAM to NVRAM?

ANSWER: copy running-config startup-config

QUESTION 3: Which information does the show vlan command display?

A. Ports that are configured as trunks
B. VMPS server configuration parameters
C. Names of the VLANs and the ports that are assigned to the VLANs
D. VTP domain parameters

ANSWER: C

QUESTION 4: What are two characteristics of OSPF? (Choose two.)

A. Proprietary
B. Similar to RIP
C. Hierarchical
D. Open Standard
E. Distance Vector Protocol

ANSWER: C, D

QUESTION 5: Which command can you type at the router prompt to verify the broadcast frequency for IGRP?

ANSWER: show ip protocols

QUESTION 6: Which command is used, and in what context, to stop routing updates from exiting a router’s serial 0 interface?

ANSWER: Router(config-router)#passive-interface s0

QUESTION 7: Which subnet mask would be appropriate for a Class C address used for 9 LANs, each with 12 hosts?

A. 255.255.255.252
B. 255.255.255.240
C. 255.255.255.224
D. 255.255.255.0

ANSWER: B

QUESTION 8: Which command correctly specifies that network 10.0.0.0 is directly connected to a router that is running EIGRP?

A. Router(config-router)# network 10.0.0.0
B. Router(config-router)# router eigrp 10.0.0.0
C. Router(config)# network 10.0.0.0
D. Router(config)# router eigrp 10.0.0.0

ANSWER: A

QUESTION 9: What does a switch do when a frame is received on an interface and the destination hardware address is unknown or not in the filter table?

ANSWER: The switch floods the network with the frame attempting to ensure that the device receives the frame.

QUESTION 10: What protocol is used to find the hardware address of a local device?

ANSWER: Address Resolution Protocol (ARP)

By: Harris Andrea

Article Directory: http://www.articledashboard.com

Harris Andrea is a Cisco Certified Professional (CCNA, CCNP, CCSP) with more than 10 years experience in the networking field.
Harris recommends the following CCNA Computer Based Training (CCNA CBT ) package to help you pass your CCNA exam Guaranteed.
A Cisco CCNA Video Training is one of the best ways to study for your certification.