Custom Search
|
|
Troubleshooting Tips For Water Heaters
No Hot Water The worst case scenario is a unit that no longer delivers hot water. If you take the proper time to troubleshoot the issue, it will potentially lead you to one of several easy fixes. To start, you'll want to make sure that you have not tripped a circuit breaker or blown a fuse. If your unit is gas, then you'll want to make sure that the pilot light is still active. If your pilot light is having issues staying lit, you may be looking at a thermocoupler replacement. Not Enough Hot Water or Not Enough Water When the supply of hot water is less than adequate or the temperature is simply not hot enough, the first step in troubleshooting the issue is making certain that the type of heater you own is appropriate for your needs. Another possible cause of these issues is an excessive damage for water at the same time. Making sure that showers, laundry and dishwasher are not being used simultaneously will do wonders for this issue. Heating Element Replacement Taking the time to become familiar with the heating element within the unit may also come in handy when troubleshooting issues with lower temperatures. Start out by reading through the owner's manual before turning off power to the unit to allow access to the element prior to it becoming an emergency issue. Though replacing these elements takes a bit of work, it is generally simple enough for the average property owner to accomplish. Too Hot! A unit that is providing a home with too much heat can be addressed by simply turning down the temperature on the thermostat. If your thermostat is not mounted in the proper fashion, this can also serve as a contributing factor. In order to remount the thermostat, you will need to remove the cut-off label, disconnect the wires to the thermostat, loosen the mounting bracket bolts and reposition the device in a way so that it is flush with the wall. Noisy Unit The causes associated with a noisy heater will vary depending on whether it is gas or electric. A gas heater found making a popping sound will generally have an issue with the gas pressure. In such cases, a certified technician should be called to inspect the unit. Electric units that become noisy, may need to have their tanks drained of sediment. You will also want to inspect the heating element to see whether it requires cleaning. If none of the solutions above solves your problems, your best bet is to get in touch with a licensed contractor who specializes in water heaters. Article Directory: http://www.articledashboard.com Do you need some repair on your Milwaukee water heaters? A licensed contractor is available for service in your area. Go to www.oakcreekplumbing.com for more information. |
|