What To Consider When Purchasing A Golf Driver

For anyone who plays golf, ensuring that you have the right type of golf driver is absolutely essential. When you first start out, having a driver that is composed of the right shaft and club head isn’t exactly on your list of priorities, but as you begin to play more regularly, this is certainly something to consider – and could even help you drop a couple of shots off your round.

Striking the ball off the tee is something that you need to get absolutely right. If its struck well, the ball could land and nestle itself somewhere on the fairway, making your second shot a lot easier than if you were to slice or hook your tee shot and see it end up in the rough, or worse still, in the out of bounds. That’s why, for those who are beginning to take golf a bit more seriously, there are a number of factors to consider when buying a golf driver.

Loft

The loft refers to the angle of the club face; the higher the loft, the higher the flight of your ball. For example, clubs with a loft of 10 degrees or less will not reach the heights of a driver with a loft of 10 degrees or higher. Many golf professionals advocate that when it comes to driving off the tee, a clean high shot will help with distance, so it’s best to aim for a club with a loft between 10 and 12 degrees, as opposed to anything less than 10 degrees.

Material

Golf drivers are made up of different materials. Some are called titanium drivers, whilst others are called steel drivers. You can get some that are a combination of both, either called composite or fusion drivers. What you get really depends on your budget here because titanium drivers are much more expensive, however, they are generally considered to perform better. This is because they are stronger than steel drivers, with the club face being considerably thinner, allowing the ball to travel further. The composite or fusion drivers may be more affordable if you’re on a tight budget.

Flexibility

The flexibility of your shaft really depends on your swing speed. For those who have a particularly slow swing speed, it’s essential to use a shaft that is more flexible, as this creates extra propulsion when you strike the ball. However, for those with fast swing speeds, a stiffer or firmer shaft will be needed. The material of your shaft will most likely be graphite, as this is the norm amongst modern drivers, but some professionals still use steel shafts.

Before you buy a new club, it is therefore important to know whether or not you have a fast or slow swing speed. This can be determined using swing speed measures, found at most retailers or professional club shops. For your information, anyone who swings slower than 80mph needs to use a shaft that is highly flexible. Those who swing between 80mph and 100mph should use a shaft that has regular flexibility, whilst anyone with a swing speed in excess of 100mph should use a stiff shaft.

Length

Length is also something that you may want to consider. Drivers nowadays are between 45” and 46” long. Most golfers use a standard length shaft, which the particular manufacturer provides. So for those just getting into the game, or even the more experienced golfers, you may just want to stick with the length that the manufacturer provides. If however, you do want a customised shaft, you would need to consider swingweights and flexibility etc.

By: Vincent A Rogers

Article Directory: http://www.articledashboard.com

This article was written by Vincent Rodgers, who writes on behalf of a number of online golf shops. If you're looking to purchase golf equipment over the internet, he recommends foremostgolfonline.